Utp Twisted Pair

TEQAVIT TPH372 - HDMI / DVI Extender over single CAT6 cable for up to 130-ft (40m) at 1080p

Teq AV/IT stands out with its value-priced Extender set (ready-to-install QikConnect Qik-Install kit) to upcoming distribution units for a point-to-point and multi-display distribution system. Clear advantages of choosing Teq AV/IT's HD CAT One twisted pair technology are:

::             Use of single UTP (CAT6 or CAT5e) cable to send HDMI or DVI signal

::             Compliant with HDCP 1.3 and DDC standards

::             Long distance range for high-resolution HD video signals (1080p, 1080i and 720p)

::             Save hundreds over comparative products in product, cable and labor cost

::             Full control over image quality at each display with Equalization and Gain control

::             Accompanying Audio is digitally transmitted, result is lossless rich audio

In many situations the HD sources with HDMI output like Blu Ray player, Media Players, Playstation3, Digital Signage Player (VPH150), Satelitte receiver, Cable boxes, broadcast or professional cameras or even DVI or now a days HDMI output from PC, laptop or Mac need to be placed either more than 15-ft (5 meter) or be a part of overall AV system for the room. Since one has spend high dollars for a HD display why not use it to show high-definition and high-resolution images at 720p or 1080i or 1080p for HDMI connection and at XGA to WUXGA for DVI connector?

•             Zero loss signal, maintains picture quality as if directly connected to source

•             Maximum resolution support for 1080p for HDMI and WUXGA (1920x1440) for DVI

•             HDMI v1.3 and HDCP compliant

•             Full bandwidth support up to 10.2 GHz

•             Easy and fast installation, Plug & Play

•             Complete control over picture quality with built-in Equalization and gain

•             Use optional HDMI to DVI adapter cable for backward compatibility to legend sources

Over View:

HD Video and Audio signal transmission from a source to a display has been either limited by short 15-ft (5 meter) cables or expensive fiber cable or thick copper cable or dual CAT5/CAT6 cable since introduction of DVI and HDMI standards. However as those digital standards are getting more common and popular replacing traditional analog sources and displays, the technology, medium, demands and rules have changed. Signals are taken over UTP (Twisted-pair) CAT5 or CAT6 cable, fiber or even wireless. CAT5-CAT6 UTP is better medium due to lower cost, simplicity in installation, equal performance as copper cables and being in tune with current technology and cabling installations in Green buildings.

Teq AV/IT's HD CAT One twisted-pair UTP transmitter-receiver pair are integral part of any projects of Presentation or dynamic digital signage/narrowcasting or info-communication in boardrooms, meeting rooms, Retail stores, supermarkets, Corporate, Transportation, Financial institution, hotel, restaurants, fast-food joints, bars, clubs, hospitals, doctor/dentist office, school, colleges, universities, churches, temples, home theaters, government buildings, multi-story buildings, industrial/manufacturing plants, theaters, sports complexes, airports, train-station, bus-stations, ferry-stands, daily-stops and many more.

Transportation

Transportation hubs are the center of any economy and it is a place where crystal clear information is necessary. It is also a place where there is undivided attention of travelers either at hubs like airport, train-station, ferry-hub, taxi-stands, bus-station and more. This is paradise for brand-marketers or corporations to advertise their products and services. However all these public places there are challenges of keeping the sources like Digital signage players or media players safe and secured at the same time offering convenes in installing, managing and maintaining.

The ideal way to run high-resolution audio and video signals from sources to one or many displays is use the same CAT5 twisted-pair cable that is embedded in those buildings for IT infra-structure. Teq AV/IT's complete line of twisted-pair CAT5 AV transmitter-receiver pair allows signal transmission from source/s to one or many displays with ease of installation, reliability and faster ROI.

Everyday thousands of customers walk into any branch to conduct their business. When the competition is tough in keeping the same customer and getting more business from same customer against internet-based competitors, it is time for bank to change those static posters into dynamic digital signage. If a customer is entering the branch or waiting in line, why not advertise additional services like home mortgage loans, business loans, student saving plans, retirement accounts and much more.

Well the information is displayed at teller stations or lobbies or waitng lounges, however the sources are secured in IT-closets along with other computer equipment. Well, Teq AV/IT's CAT5 transmitter-receiver pair interfaces come to the rescue.

About the Author

Teq AV/IT has products from merging AV and IT industry to take benefits of best technology from both. Teq AV/IT is known for its wireless presentation gateway / Wireless Computer video receiver, Video over IP network, complete line of AV (Audio, high-resolution and HD video) Extenders, Scalers - Matrix Switchers, HDMI/DVI Products, CAT5/6 interface and twisted-pair active baluns, Network recorder and simultaneous broadcaster over LAN/WAN (netRPB) and IPTV player add to Teq AV/IT product line.

Shielded Twisted Pair (STP) Network Cable Is Utilised Primarily In Token Ring Networks

By far the most typically applied cable for telecommunication is Twisted Pair wire. Pairs of Copper wires within this cabling are twisted into pairs about one another. The resulting cable is utilized for each voice and information transmissions inside a computer system network. Twisted wires support in reducing the noise and crosstalk. The transmission pace of twisted pair cable ranges in between 2 million and a hundred million bits per 2nd. Unshielded Twisted Pair (UTP) and Shielded Twisted Pair (STP) are two several classes of twisted pair wires.

Unshielded Twisted Pair Cables

UTP may be the most well-known networking cable for connecting numerous computer systems, as it's cost efficient and comparatively simpler to use. Because the identify indicates, the twisted cables of this sort are not shielded and therefore are utilized with Ethernet networks. This includes four pairs of twisted Copper wires in a typical cable sheath, which eliminates the electromagnetic stimulation. UTP is the widely utilised cable for Local Area Network and has some types listed below:

Shielded Twisted Pair Cables

Shielded Twisted Pair (STP) network cable is utilised primarily in token ring networks. In STP, the twisted pairs of wire are wrapped inside a foil shield and enclosed inside a wire shield that is braided on the outdoors. This shielding assists in reducing the EMI radiation and sensitivity to cross-talk. STP isn't ordinarily made use of for Ethernet, but the Ethernet normal explains the ways it might be made use of with 10Base-T, 100Base-TX and 100Base-T2 Ethernet networks. This can only be performed by putting in transformers with particular impedances. As opposed to UTP, it only is made up of two twisted pairs.

Coaxial Cables

Coaxial cable consists of 3 major components: an inside Copper conductor, a dielectric tubular insulating layer, plus a metallic tubular conducting layer. The insulating layers are employed for lowering any probable interference. Its transmission speed ranges from 200 million to over 500 million bits per second. The bandwidths of those cables are really wide which helps make it perfect for your transmission voice and video conversations along with other information concurrently.

Optical Fiber Cables

Optical fiber cable consists of one or a lot more optical fibers that are coated with protective layers produced of plastic and carry the information via pulses of light that are able to traveling lengthy distances. Uninterrupted by electromagnetic radiation, these transmit the data at the speed that is perceived to achieve trillions of bits per 2nd. This cable has the quickest transmission velocity when in comparison with another kind of cable.

Directly and Crossover

The cables are both crossover or straight over. A crossover cable, also known as wire gauge, is made use of for connecting one device immediately to another, without making use of a hub. On the other hand, a straight-wired cable connects a device to some hub or a router to some change. In this situation, the hub or even the change capabilities like a crossover. You may readily determine both the cables by just searching at them. The straight-wired cable is identical on each the ends, whereas crossover is distinctive. Whichever kind of network cable you need, you possibly can obtain it over the net at an inexpensive price. There are various on the web stores that present network cables such as fiber optical cables, UTP cables, cat5 cable, cross wired cables and many other people.

what is UTP cable (Unshielded Twisted Pair cable)?

with complete explaination

http://www.ciscopress.com/articles/article.asp?p=31276

NVT Unsheilded Twisted Pair (UTP) Product Demonstration